Features
> SLC-NAND type flash technology
> Standard 7 pins SATA female connector
> Form-factor support vertical & horizontal
> High speed item (plastic casing) : 2GB ~ 32GB (Quad CH.)
> Normal speed item (w/o casing) : 128MB ~ 8GB (Single CH.)
> High speed item supports write protect function
> Power request optional: Built-in power pin-7 (w/fuse) or 5V power input power cable (w/o fuse)
> Performance up to 131.2 MB/sec (Quad CH.)
> Performance up to 34.5 MB/sec (Single CH.)
Specifications
> |
Compliant with Serial ATA standard rev. 1.0a and 2.6 |
|
> |
Flash Technology :NAND type SLC flash based |
|
> |
Form-factor : |
|
- |
Vertical type : Standard / Low profile |
|
- |
Horizontal type : Standard / Low profile / Lowprofile with mounting hole |
|
> |
Perfromance : |
|
- |
Data Transfer Rate : Serial ATA standard Gen1(1.5Gbps) and Gen2 (3.0Gbps) |
|
- |
Sequential read : 131.2 MB/sec (Quad CH.) |
|
- |
Sequential read : 34.5 MB/sec (Single CH.) |
|
- |
Sequential write : 126.3 MB/sec (Quad CH.) |
|
- |
Sequential write : 33.01MB/sec (Single CH.) |
|
- |
Average access time : 0.1ms |
|
> |
Reliability : |
|
- |
Wear-leveling : Static wear-leveling algorithms |
|
- |
MTBF : > 4,000,000 hours |
|
- |
Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad |
|
|
sector management algorithms |
|
- |
ECC : Enhanced management 16 bits per 512bytes block |
> |
Environmental specification : |
- |
Humidity : 10% ~ 95% non-condensing |
- |
Vibration : 15G |
- |
Shock : 1500G |
- |
Altitude : 70,000 feet |
> |
Power consumption : |
- |
5V±10% Build-in power pin-7(w/fuse) |
- |
5V power input power cable(w/o fuse) |
- |
Reading mode : 240.0 mA (Max.) |
- |
Writing mode : 270.0 mA (Max.) |
- |
Idle mode : 150.0 mA (Max.) |
> |
Warranty : |
- |
3 years warranty for SLC standard grade |
- |
5 years warranty for SLC industrial grade |
> |
Conformal coating : Option for special request |
Warranty
Warranty : Standard grade 3 years / Industrial grade 5 years