DIRECT REPLACEMENTS
FOR 8-INCH DISK DRIVES
NEW Disk Storage Provides High-Reliability
Replacements for SMD to SMD-E Drives.
Directly Replaces:
• Control Data - Sabre I to VII
• Fujitsu - M2322K & Swallow - 82MB, 169MB up.
• Hitachi - DK811, DK 812
• Northern Telecom - Mercury
• Toshiba
• Priam - 803, 805, 806
• NEC - D22XX
...and others.
EASY Upgrades for Installed Computers.
Featuring:
• Drop-In Replacement;
- No Wiring Changes,
- No Software Changes,
- Same Size as Present Drive.
• Error-Free with Continuous Self-Test
• Internal SCSI Drive for High Reliability
• 84 MB to 1.2 GB
• Reduces Power Supply Load
TRANSPARENT UPGRADES for SMD/E DISK DRIVES
Now there is a simple way to use reliable SCSI drives on
present real-time or minicomputer. Reduce downtime and service
calls - eliminate unreliable disk drives. The EID-1 directly
replaces the original disk drive with a Reactive drive emulator.
EID-1 mimics the operation of the original drive, but actually
stores data on a new SCSI drive. The change is totally transparent
to the operating system. The operating procedures for the
system are not altered.
PLUG COMPATIBLE with 8-INCH DRIVES
No hardware or software modifications are required to upgrade
to fast, reliable SCSI drives on existing computers. Unplug
the existing disk drive and install the EID-1, using the same
cables. Power for the unit is provided from the existing power
supply - same as the old drive. Changes to the diagnostics
or operating software are not necessary.
EID-1 replaces most 8-inch disk drives using the industry
standard SMD to SMD-E interface. For systems using a drive
control panel, an interface connector is provided on the EID-1.
Adapters can be provided for the specific drive being replaced.
MAINTENANCE FREE
The EID-1 carries a 1 year warranty and uses Ultra SCSI disk
drives for low maintenance operation. Many drives are rated
in excess of 500,000 hours MTBF.
|
