» Compatibility Serial ATA standard rev. 1.0a
» Flash Technology SLC-NAND type flash based
» Form-factor Compact-designing in vertical type
» Host Interface Standard 7-pin SATA female connector
» Performance
  ´ Data transfer rate Serial ATA standard Gen1(1.5Gbps)
  ´ Sequential read 24.0MB/sec (64MB file test / 4GB mSATA)
  ´ Sequential write 14.0MB/sec (64MB file test / 4GB mSATA)
  ´ Average access time 1ms (estimated / 4GB mSATA)
» Environmental specification
  ´ Operating temperature Standard grade 0˚C ~ 70˚C
  ´ Non-operating temperature Standard grade -20˚C ~ 80˚C
  ´ Humidity 10% ~ 95% non-condensing
  ´ Acoustic noise 0dB
  ´ Vibration 15G compliance to MIL-STD-810F
  ´ Shock 1,500G compliance to MIL-STD-810F
  ´ Altitude 70,000 feet
» Power consumption
  ´ Power requirement 5V 10%
  ´ Reading mode 155 mA (Max.)
  ´ Writing mode 170 mA (Max.)
  ´ Sleeping mode 105 mA (Max.)
» Reliability
  ´ Wear-leveling Dynamic wear-leveling algorithms
  ´ MTBF > 3,000,000 hours
  ´ ECC Enhanced management 8-bits per 512bytes block
  ´ Endurance > 2,000,000 cycles logically contributed by dynamic wear-leveling and advanced bad sector management algorithms
  ´ Data reliability < 1 non-recoverable error in 1014 bits read
  ´ Data retention 10 years
» Physical specification
  ´ Weight (max.) 20 g / 0.71 oz
  ´ Dimension (W x L x H) 39.20 x 20.50 x 8.0 mm
» Conformal coating Option for special request