> SLC-NAND type flash technology
> Standard 7 pins SATA female connector
> Form-factor support vertical, leftward and rightward
> Built-in ECC corrects up to 8 bits per 512 bytes
> Serial ATA 1.0a Specification compliance
> Performance up to 25.1 MB/sec
> Power request optional: Built-in power pin-7 (w/fuse) or 5V power input power cable (w/o fuse)
> Capacity from 128MB up to 16GB

>	Compliant with Serial ATA standard rev. 1.0a
>	Flash Technology :NAND type SLC flash based
>	Form-factor :
-	Vertical type : Standard / Low profile
-	Horizontal type : Standard / Low profile / Lowprofile with mounting hole
>	Perfromance :
-	Data Transfer Rate : Serial ATA standard Gen1(1.5Gbps)
-	Sequential read : 25.1 MB/sec (64MB file test / 4GB mSATA)
-	Sequential write : 14.4 MB/sec (64MB file test / 4GB mSATA)
-	Average access time : 0.1ms (estimated)
>	Environmental specification :
-	Humidity : 10% ~ 95% non-condensing
-	Acoustic noise : 0dB
-	Vibration : 15G
-	Shock : 1500G
>	Reliability :
-	Wear-leveling : Dynamic wear-leveling algorithms
-	MTBF : > 3,000,000 hours
-	Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad
	sector management algorithms
-	ECC : Enhanced management 8-bits per 512bytes block
-	Data Data retention : 10 Years

>	Power consumption :
-	5V±10% Build-in power pin-7(w/fuse)
-	5V power input power cable(w/o fuse)
-	Reading mode : 155.0 mA (Max.)
-	Writing mode : 170.0 mA (Max.)
-	Sleeping mode : 105.0 mA (Max.)
>	Warranty :
-	3 years warranty for SLC standard grade
-	5 years warranty for SLC industrial grade
>	Conformal coating : Option for special request

Capacity	Horizontal Type Standard Grade	Horizontal Type Industrial Grade
128MB	SBMSF128M-TACSC-HS (HL, HO) (/F)	WBMSF128M-TAISI-HS (HL, HO) (/F)
256MB	SBMSF256M-TACSC-HS (HL, HO) (/F)	WBMSF256M-TAISI-HS (HL, HO) (/F)
512MB	SBMSF512M-TACSC-HS (HL, HO) (/F)	WBMSF512M-TAISI-HS (HL, HO) (/F)
001GB	SBMSF001G-TACSC-HS (HL, HO) (/F)	WBMSF001G-TAISI-HS (HL, HO) (/F)
002GB	SBMSF002G-TACSC-HS (HL, HO) (/F)	WBMSF002G-TAISI-HS (HL, HO) (/F)
004GB	SBMSF004G-TACSC-HS (HL, HO) (/F)	WBMSF004G-TAISI-HS (HL, HO) (/F)
008GB	SBMSF008G-TACSC-HS (HL, HO) (/F)	WBMSF008G-TAISI-HS (HL, HO) (/F)

>	HS : Horizontal type standard form factor
>	HL : Horizontal type low profile form factor
>	HO : Horizontal type low profile form factor with mounting hole