Drive configurations change frequently. Please consult your sales representative for the latest drive information.

• On-board ATA-4 controller supports six different combinations of storage devices:
  • DVD-RW (most versions supported)
  • 2.5" ATA rotating and/or solid state flash disks
  • CompactFlash (Type I or II)
• Supports Hot Swap Removal (ask about RAID support)
• 32-bit, 33 MHz PCI 2.1 compliant CompactPCI interface
• Front panel has activity LEDs and ejector handles for easy removal
• Uses 9.5 mm high, 2.5" ATA/IDE hard disks
• Supports rotating  and solid state flash media
• CompactFlash media support for versions -2, -3, -5, and -6
• ATA disks available in Enhanced Duty cycle or extended temperature versions
• Operating Systems supported: VxWorks, Linux, and Windows
• Choose from six combinations:
  • 6000-1 :  One CD-R/RW drive, one 2.5" ATA hard disk
  • 6000-2 :  One CD-R/RW drive, one CF-II drive
  • 6000-3 :  One CD-R/RW drive, \two CF-II
  • 6000-4 : Three 2.5" ATA hard disks
  • 6000-5 : Two 2.5" ATA hard disks, one CF-II
  • 6000-6 : Two 2.5" ATA hard disks, two CF-II, one internal, one front access

**Please inquire about new RAID support on the CPCIStor

General
Each module has an on-board ATA-4 controller, supporting hot swap removal and six different combinations of storage devices. See order information for available versions.

Physical
The system disk module is 6U high by 4HP (0.8") wide by 160mm deep, compatible with CompactPCI mechanical and electrical specifications. Weight: <2 pounds.

Input/Output
I/O is routed via the rear through the J5 connector. An I/O interconnect ribbon cable (18") is provided.

Compatibility
These modules are directly compatible with most CompactPCI SBCs. Contact us for details on modules for other platforms.

Electrical Specifications

• ATA-4 compliant disk controller uses Silicon Image PCI646 chipset; PCI 2.1 compliant
• Supports PIO Mode 1 - 4, Ultra 33, UDMA-2

Power Requirements
Worst Case Input Power
Hard Drive: +5V ± 5% @ 1A max
DVD/RW Drive: +5V ± 5% @ 1.2A avg., 1.6A peak

Board Environmental Specifications

• DC Input Voltage: 5V ±5% @ .75A typical
• Operating Temperature: 0°C to 55°C
• Storage Temperature: 0°C to 70°C